Fixed rooflight

Rooflight Multipart

For an even more beautiful effect, Dutch Roof Design’s modules can be connected to form a bigger rooflight. With the Rooflight Multipart, you can bring an infinite amount of daylight into your design. The components can be interconnected with a slim silicone joint or, for a larger span, with an aluminium profile in the desired colour.

 

Request information

 

Available with different glass specifications
Flush integration into the roof
Large surface area possible

Designed for creators & architects

Flushglaze multipart lichtstraat
Modulaire lichtstraat in slaapkamer, elektrische verduistering mogelijk
Sky Only View modulaire lichtstraat glasdak
Lichtstraat Flushglaze multipart
Lichtstraat Modulair

Perfect insulation

Choose your glass type:
HR++ of HR +++

01 Lichtstraat multipart b2b transparant

Sleek joints

Minimal framework

Tested to excellence

Guaranteed waterproof and safe

Mega-large rooflights

Design with light and air

Sliding over roof
Lichtstraat flushglaze multipart
Multipart lichtstraat Zeereep
Lichtstraat Modulair Raboes
Lichtstraat Modulair met Topshade zonwering gesloten
Lichtstraat Modulair met Topshade zonwering
USP icon Sky only view
Sky Only View
USP icon Advies op maat
Tailored advice
USP icon HR++/+++
HR ++/+++
USP icon Aanpassen aan uw ontwerp
Adjust to your design
USP icon Frameloos design
Frameless design
USP icon Eenvoudige plaatsing
Easy installation
USP icon Hoge kwaliteit
High quality

Compose your own rooflight

When composing the Rooflight Multipart, you have two choices: a sleek silicone joint or an aluminium T-profile.

Flushglaze multipart

Up to a span of one and a half metres, a simple silicone joint is all that is needed to connect the glass sections. This is a great solution if you want a seamless rooflight look.

Are the rooflights wider or with a different type of glass than standard? Then the slim T-shaped aluminium profile is the way to connect the glass sections.

We prepare the Rooflight modules at the factory. Everything is made to measure so you can install them easily.

Lichtstraat modulair in het schuine dak installatie
Easy installation

As the modules are prepared at the factory, all you have to do is place them on the prepared upstand.

Have you chosen the connection with the T-profile?
Then simply join the profiles together on the inside. For guaranteed watertightness, apply a sealant joint to the outside of the glass connection. As standard, we supply this silicone sealant.

Silicone joint?
With a silicone joint, it is even easier: here, only the sealant joint is needed to connect the modules watertight.

Installation service

For even more convenience, our installation team will also be happy to install your Rooflight Multipart.

Everything in detail

Sizing

Incredible possibilities

Connect glass parts to form a glass roof

Surface area

Maximum 6m2 per module

Dimensions

Maximum 5 metres in one part

About the product

Frame material

Aluminium

Upstand material

You make these yourself from wood or stone according to our drawings. 75mm wide and 150mm high. Inclination angle at least 3 degrees.

Colour

Standard anthracite grey – other colours possible

Glass

Always the best glass: heat-resistant, laminated, super-insulating and safe

The most populair rooflights in our product line

View all