Explanation: Glass specifications explained
HR++, high-performance glass, walk-on glass, safety glass. There are so many terms. What exactly does it mean? This article explains the difference between our standard glass, laminated glass, and walk-on glass.
Double, triple, or laminated glazing. When you buy a glass roof hatch or skylight, you want the highest quality glass. Naturally, with the best insulation values to ensure you meet the standards for your project.

Standard double glazing: tempered and insulation value comparable to HR++
Our standard double glazing has excellent insulating properties comparable to HR++. The features at a glance:
- HST tempered glass is safer
The glass is "Heat Strength Toughened," meaning it's tempered through thermal treatment. This gives the glass special properties: it's extra strong, resistant to greater temperature fluctuations, and safer. Just like glass in car windows or bus shelters, for example, the glass shatters into small pieces when broken. - Argon-filled cavity
The cavity between the glass layers is filled with argon. This noble gas provides better insulation than dry air. - Special low E coating for better thermal efficiency
The inner pane of the glass has an invisible low-E coating, which reduces heat loss. This means heat stays out in summer and in in winter, while maintaining the same light transmission.

Triple glazing: improves the insulation value HR+++
If you need even better insulation, you can opt for triple glazing. This consists of three panes of glass with two argon-filled cavities. The insulation value is comparable to HR+++.
This allows you to meet the standards required for the passive house standard. The heat loss, expressed as U-value, must be below 0,8 W/m²K. However, the U-value of glass depends not only on the type of glass but also on the glass size. For example, narrower strips of glass have a higher U-value than wider strips.
Laminated glass: laminated glass
Laminated glass is also called safety glass. It consists of individual sheets of glass with a transparent (PVB) film between them. If the glass breaks, this film holds it together, preventing large gaps. The construction of laminated glass is determined by the thickness of the sheets of glass and the film between them. Multiple layers of film can be used.
The maximum size of laminated glass is smaller than that of double and triple glazing. For both, the maximum size depends on the ratio of length to width.

Frosted glass: laminated with a white interlayer
Do you want to use glass above a bathroom or another room where you want natural light to enter, but prefer to keep out the view? We can supply glass with a white interlayer. This provides privacy while maintaining a high level of light transmission.

Which glass should I use?
Glass standards vary by country and application. Dutch Roof Design is happy to advise you on the type of glass that best suits your needs..
Discover the products in this article
Blog
With endless possibilities, it is nice to be able to gather targeted inspiration. View all our realized and potential solutions in a single overview below.
view everything
